Steam Community :: Guide :: Ремонт и как не попасть в долги

Steam community :: guide :: описание полного восстановления машины

Пункт первый. Снимаем все кузовные элементы (крыло, дверь и всё остальное). Тут игра даёт хорошую поблажку и винты с болтами крутить не надо, да и не закисли они. Так что снимаем их полностью и идём их ремонтировать.
Steam Community :: Guide :: Ремонт и как не попасть в долги
Вот этот стол на котором и проходит весь ремонт. На нем ремонтируем все детали. Только сперва надо набрать 90% ремонта, а то иначе не будет доступны как раз инструменты для ремонта кузовных деталей ( сами Вы инструменты не увидите в игре, но если не взять, то и ремонт не будет доступен).

После проведения ремонта, часть деталей Вы сломаете, а может и не сломаете. Тут как повезёт. Но все детали которые получилось восстановить ставим на автомобиль.
Steam Community :: Guide :: Ремонт и как не попасть в долгиSteam Community :: Guide :: Ремонт и как не попасть в долги
Но в тот же момент замечаем, что кузов не получил 100%, да это введение в версии и сам кузов надо тоже восстановить. Это делается с помощью газового баллона.
Steam Community :: Guide :: Ремонт и как не попасть в долги

Подходим, нажимаем на баллон и попадаем в меню выбора автомобилей которые доступны для ремонта и выбираем там нужный автомобиль.
Steam Community :: Guide :: Ремонт и как не попасть в долгиSteam Community :: Guide :: Ремонт и как не попасть в долги
После смотрим на состояние автомобиля кузова и уже видим совсем другие цифры.
Steam Community :: Guide :: Ремонт и как не попасть в долгиSteam Community :: Guide :: Ремонт и как не попасть в долги


Steam community :: guide :: car mechanic simulator 2021 complete guide

Controls and useful information about the game mechanics

Let’s get started. When you start the game, you need to make a profile first. You did it? Great! Now you can select ‘new’ in the menu, creating a new game, playthrough or campaign, whatever you want to call it. Right, so in normal mode you will be asked if you want to go through the tutorial, in expert mode you will not be asked this, as the game expects you to be experienced. If you selected the normal, feel free to go through the tutorial, just know that this guide teaches it all. The tutorial of the game walks you through the basics, like how to accept a job, and unmounting in the right place and order. Right, so, basic controls are just like in every other first person game, W,A,S,D to move around, and mouse to look around. The more ‘complex’ and somewhat unique controls to CMS (We’ll just call Car Mechanic Simulator CMS now on for simplicity) are:

Код ошибки:  diagnostic scanner obd2 eobd obdii can на АлиЭкспресс — купить онлайн по выгодной цене

I – Inventory – Pretty self-explanatory

O – Order information – When standing next to a car, this shows the task description of what you need to do to the car, faulty parts found, the car brand and model, which are fictional, minimum condition all the parts must be, money spent on job, bonus for completing tasks, and finally the bonus for completing the order. Here you can also choose a favorite for a part, creating a neon blue silhouette around the part and also you can finish the job regardless if the tasks are completed or not.

M – Move vehicle – When standing next to car you want to move, press M and select the destination. Parts that can be disassembled from under the hood without the need to use the lift, are usually airfilters, fuel filters, ignition coils, batteries, throttles, intakes, fuel rails, timing parts, exhaust manifolds, spark plugs, camshafts, camgears, brake servos, ABS pumps and modules, radiators and radiator fans, alternators, powersteering pumps, water pumps, engine head covers as well as engine heads.

H – Toggle body mode – When standing next to the car, you can press H and that ghosts the car body, making all the parts easier to see.

C – Toggle conditions mode – This mode allows you to see at what conditions parts are, just like you would in a manual examine mode.

T – Tablet – This device can be unlocked after earning 1000 experience points. There’s quite a few upgrades which I will be covering later.

1 – Disassemble mode – In this mode you disassemble parts, whether you’re looking at and engine, wheels, undercarriage, or even the body, just hold right click on the part you want to disassemble and off you go.

2 – Assemble mode – Pretty much the same as the disassemble mode, but it shows white ghosted parts where the parts belong. Hold right click on the ghosted part you want to assemble back to the car until a pop-up list appears and select the part from the list.

3 – Manual examine – In this mode you can manually examine parts by holding right click. Please note that not all parts can be manually examined. Every part that has been taken off can be seen at a set amount of prosentage, whether it’s in the inventory or on the pop-up menu of assembly. White means not examined, red broken, orange bad quality (you don’t need to replace orange parts), yellow medium quality, and green good/excellent quality.

Useful to know-controls:
I learned within around few hours of playing that shift click makes life easier. If you’re in the shop, shift click buys the part without asking for confirmation, in inventory it sells. Simple, right? Another simple thing that took me over 60 hours is that you can do this as well when fixing parts! Trust me, it makes life so much easier later.

If you’re still wondering how to start disassembling the engine, or even struggle to pop up the hood, it’s as simple as left clicking the hood in disassembly mode, and then left clicking the engine or any other location of the vehicle, such as wheels and undercarriage. You need to have the car on a lift before you can remove wheels or shocks and obviously the car has to be lifted up before you can access the undercarriage or exhaust.


Using the obd scanner :: car mechanic simulator 2021 general discussions

I’d like to know where I can find the OBD scanner port. Right now it seems the port is no longer at the front driver’s seat (as in CM2021).

Also, I’d like to know where to use the compression meter and electric meter as well. Thanks.


Dear Players,

Car Mechanic Simulator 2021 will be released on August 11th!
Thanks to our Loyalty Discount, you can get a CMS 2021 at an additional 10% off!

To verify whether you’re eligible:

• Check your Steam Library to see if you own one of the games from the list below
• If you do, you get 10% off Car Mechanic Simulator 2021 – the discount will be available on the CMS 2021 Steam store page
• Be quick! The offer lasts 7 days, between August 11-18

Please note that the Loyalty Discount adds up with the 5% Launch Discount, which means you can buy Car Mechanic Simulator 2021 – 15% off!

To receive the 10% Loyalty Discount, you must own one of the games listed below:

– The Tenants
– Mr. Prepper
– Mech Mechanic Simulator
– Rover Mechanic Simulator
– Lust from Beyond
– Car Mechanic Simulator 2021
– Car Mechanic Simulator 2021
– Car Mechanic Simulator 2021
– Cooking Simulator
– House Flipper
– Barn Finders
– Thief Simulator
– Tank Mechanic Simulator
– Ultimate Fishing Simulator
– 911 Operator
– 112 Operator
– Rustler
– Train Station Renovation
– Drug Dealer Simulator
– The Beast Inside
– Lust for Darkness
– Plane Mechanic Simulator
– Gold Rush: The Game
– Accident
– Agony

Оцените статью
Добавить комментарий